Aldiminium and 1,2,3-triazolium dithiocarboxylate zwitterions derived from cyclic (alkyl)(amino) and mesoionic carbenes

• Nedra Touj,
• François Mazars,
• Guillermo Zaragoza and
• Lionel Delaude

Beilstein J. Org. Chem. 2023, 19, 1947–1956, doi:10.3762/bjoc.19.145

• just three decades (Figure 1) [2]. In particular, cyclic diaminocarbenes based on the imidazoline, benzimidazole, or imidazole ring system (A–C) have led to a myriad of applications in organometallic chemistry, homogeneous catalysis, and materials science, to name just a few [3][4][5]. Due to their

A novel recyclable organocatalyst for the gram-scale enantioselective synthesis of (S)-baclofen

• Gyula Dargó,
• Dóra Erdélyi,
• Balázs Molnár,
• Péter Kisszékelyi,
• Zsófia Garádi and
• József Kupai

Beilstein J. Org. Chem. 2023, 19, 1811–1824, doi:10.3762/bjoc.19.133

• stereoselective Michael addition reactions. Homogeneous catalysis was carried out in non-polar solvents (i.e., toluene), which allows the high performance of the lipophilic organocatalyst in terms of yield and stereoselectivity. To facilitate the pharmaceutical use of the lipophilic organocatalyst, we

Application of N-heterocyclic carbene–Cu(I) complexes as catalysts in organic synthesis: a review

• Nosheen Beig,
• Varsha Goyal and
• Raj K. Bansal

Beilstein J. Org. Chem. 2023, 19, 1408–1442, doi:10.3762/bjoc.19.102

• . A number of excellent reviews on different aspects of NHC chemistry has been published during this period [12][13][14]. NHCs have been widely employed in homogeneous catalysis [12] and as ligands for the preparation of coordination compounds of different metals [13]. The M–NHC bond is relatively

• for more acidic alkyne substrates. In contrast to the reaction under homogeneous catalysis conditions by a saturated solution of Cu(OAc), the reaction in the presence of catalyst 136 was 4.5 times (in the absence of HOAc) and 7.5 times (with HOAc) faster. Recently in 2022, Pérez-Torrente and co

C3-Alkylation of furfural derivatives by continuous flow homogeneous catalysis

• Grédy Kiala Kinkutu,
• Catherine Louis,
• Myriam Roy,
• Juliette Blanchard and
• Julie Oble

Beilstein J. Org. Chem. 2023, 19, 582–592, doi:10.3762/bjoc.19.43

• formation of the imine directing group and the C3-functionalization with some vinylsilanes and norbonene. Keywords: biomass; C–H activation; flow; furfural; homogeneous catalysis; Introduction The conversion of biomass derivatives into value-added products is one of the key branches of green chemistry and

Transition-metal-catalyzed C–H bond activation as a sustainable strategy for the synthesis of fluorinated molecules: an overview

• Louis Monsigny,
• Floriane Doche and
• Tatiana Besset

Beilstein J. Org. Chem. 2023, 19, 448–473, doi:10.3762/bjoc.19.35

• functionalization of C(sp2) and C(sp3) centers with SCF3, SeCF3, or OCH2CF3 groups among others, by C–H bond activation. The scope and limitations of these transformations are discussed in this review. Keywords: C–H bond activation; emergent fluorinated groups; homogeneous catalysis; organofluorine chemistry

Friedel–Crafts acylation of benzene derivatives in tunable aryl alkyl ionic liquids (TAAILs)

• Swantje Lerch,
• Stefan Fritsch and
• Thomas Strassner

Beilstein J. Org. Chem. 2023, 19, 212–216, doi:10.3762/bjoc.19.20

• acylation; homogeneous catalysis; ionic liquids; iron catalysis; TAAILs; Introduction The Friedel–Crafts acylation is one of the oldest metal-catalyzed reactions in organic chemistry [1] and allows for the synthesis of a broad range of diverse compounds [2][3][4][5]. Starting from electron-rich aromatic

Heterogeneous metallaphotoredox catalysis in a continuous-flow packed-bed reactor

• Wei-Hsin Hsu,
• Susanne Reischauer,
• Peter H. Seeberger,
• Bartholomäus Pieber and
• Dario Cambié

Beilstein J. Org. Chem. 2022, 18, 1123–1130, doi:10.3762/bjoc.18.115

• development of several strategies to immobilize transition-metal photocatalysts [22]. In the case of flow-metallaphotoredox catalysis packed-bed reactors were not applied to date. This is likely because these reactions are mainly carried out using homogeneous catalysis. Several studies have shown that the

Diametric calix[6]arene-based phosphine gold(I) cavitands

• Gabriele Giovanardi,
• Andrea Secchi,
• Arturo Arduini and
• Gianpiero Cera

Beilstein J. Org. Chem. 2022, 18, 190–196, doi:10.3762/bjoc.18.21

• ][2][3]. In this context, phosphines represent the most exploited class of ligands in homogeneous catalysis [4]. Noteworthy, reason of their wide applicability is the possibility of controlling the steric and electronic properties by proper functionalizations, hence tuning the catalytic properties of

Earth-abundant 3d transition metals on the rise in catalysis

• Nikolaos Kaplaneris and
• Lutz Ackermann

Beilstein J. Org. Chem. 2022, 18, 86–88, doi:10.3762/bjoc.18.8

• , notable advances have been accomplished with environmentally benign, Earth-abundant 3d transition metals [6][7]. The articles in this thematic issue dedicated to advances in Earth-abundant 3d metal catalysis highlight the unique power of 3d transition metals with a topical focus on homogeneous catalysis

A comprehensive review of flow chemistry techniques tailored to the flavours and fragrances industries

• Guido Gambacorta,
• James S. Sharley and
• Ian R. Baxendale

Beilstein J. Org. Chem. 2021, 17, 1181–1312, doi:10.3762/bjoc.17.90

One-pot multicomponent green Hantzsch synthesis of 1,2-dihydropyridine derivatives with antiproliferative activity

• Giovanna Bosica,
• Kaylie Demanuele,
• José M. Padrón and
• Adrián Puerta

Beilstein J. Org. Chem. 2020, 16, 2862–2869, doi:10.3762/bjoc.16.235

• used since it offers a greener alternative to homogeneous catalysis and ideally a solvent-free design to reduce the amount of solvent waste [21][22]. These two factors will reduce the amount of hazardous chemicals by reducing the amount of solvent in the reactor and during the workup of the product. A

Efficient [(NHC)Au(NTf₂)]-catalyzed hydrohydrazidation of terminal and internal alkynes

• Maximillian Heidrich and
• Herbert Plenio

Beilstein J. Org. Chem. 2020, 16, 2080–2086, doi:10.3762/bjoc.16.175

• alkynes (7a–j, 10 examples, 0.2–0.5 mol % [(NHC)Au(NTf2)], T = 60–80 °C) utilizing a complex with a sterically demanding bispentiptycenyl-substituted NHC ligand and the benign reaction solvent anisole, is reported. Keywords: alkyne; gold; homogeneous catalysis; hydrohydrazidation; NHC ligand

In silico rationalisation of selectivity and reactivity in Pd-catalysed C–H activation reactions

• Liwei Cao,
• Mikhail Kabeshov,
• Steven V. Ley and
• Alexei A. Lapkin

Beilstein J. Org. Chem. 2020, 16, 1465–1475, doi:10.3762/bjoc.16.122

• functionalization of C–H bonds is a powerful strategy for the synthesis and derivatization of organic molecules [12]. Homogeneous catalysis employing transition metal complexes has been widely accepted as one of the most efficient ways to perform C–H activation-based synthesis with high selectivity under relatively

The charge-assisted hydrogen-bonded organic framework (CAHOF) self-assembled from the conjugated acid of tetrakis(4-aminophenyl)methane and 2,6-naphthalenedisulfonate as a new class of recyclable Brønsted acid catalysts

• Svetlana A. Kuznetsova,
• Alexander S. Gak,
• Yulia V. Nelyubina,
• Vladimir A. Larionov,
• Han Li,
• Michael North,
• Vladimir P. Zhereb,
• Alexander F. Smol'yakov,
• Artem O. Dmitrienko,
• Michael G. Medvedev,
• Igor S. Gerasimov,
• Ashot S. Saghyan and
• Yuri N. Belokon

Beilstein J. Org. Chem. 2020, 16, 1124–1134, doi:10.3762/bjoc.16.99

• , providing some dissolved F-1 as the real catalyst. In all cases, the catalyst could easily be recovered and recycled. Keywords: Brønsted acid catalyst; charge-assisted hydrogen-bonded framework; Diels–Alder; epoxide ring opening; heterogeneous catalyst; Introduction Tremendous successes in homogeneous

• catalysis are well-known and documented [1][2][3]. However, problems associated with catalyst recovery limit the application of homogeneous catalysts in industry and sometimes make their heterogenization necessary. Unfortunately, the immobilization of a homogeneous catalyst onto supports, such as

Copper catalysis with redox-active ligands

• Agnideep Das,
• Yufeng Ren,
• Cheriehan Hessin and
• Marine Desage-El Murr

Beilstein J. Org. Chem. 2020, 16, 858–870, doi:10.3762/bjoc.16.77

• [2][3]. Inspired by the broad chemical repertoire of radical-ligand containing metalloenzymes, chemists have developed redox-active ligands as surrogates for the biologically occurring redox cofactors and this has translated into active developments in homogeneous catalysis [4]. The unique electronic

Rhodium-catalyzed reductive carbonylation of aryl iodides to arylaldehydes with syngas

• Zhenghui Liu,
• Peng Wang,
• Zhenzhong Yan,
• Suqing Chen,
• Dongkun Yu,
• Xinhui Zhao and
• Tiancheng Mu

Beilstein J. Org. Chem. 2020, 16, 645–656, doi:10.3762/bjoc.16.61

• homogeneous catalysis, and substantial value-added bulk and fine chemicals are available through this technology [13]. In spite of the existing plentiful progress in this conversion, the exploitation of advanced and more effective catalytic systems to the activity and to widen the range of substrates is

Architecture and synthesis of P,N-heterocyclic phosphine ligands

• Wisdom A. Munzeiwa,
• Bernard Omondi and
• Vincent O. Nyamori

Beilstein J. Org. Chem. 2020, 16, 362–383, doi:10.3762/bjoc.16.35

• applicability of the catalysts in two-phase homogeneous catalysis because it allows easy recycling [85] and separation from the reaction mixture [8]. Carbon–halogen bonds are more activated than carbon–hydrogen bonds and hence the halogen is more labile and preferentially displaced. Brill et al. [86] took

Synthesis of 3-alkenylindoles through regioselective C–H alkenylation of indoles by a ruthenium nanocatalyst

• Abhijit Paul,
• Debnath Chatterjee,
• Srirupa Banerjee and
• Somnath Yadav

Beilstein J. Org. Chem. 2020, 16, 140–148, doi:10.3762/bjoc.16.16

• anchored indole derivative under homogeneous catalysis with RuCl3⋅3H2O. Probable catalytic mechanism for the transformation of 1a by the RuNC. Control experiments and optimisation of the conditions for the alkenylation of indole (1a). Robustness screen of the synthesis of 3-alkenylindole 3b.a Supporting

Formation of alkyne-bridged ferrocenophanes using ring-closing alkyne metathesis on 1,1’-diacetylenic ferrocenes

• Celine Bittner,
• Dirk Bockfeld and
• Matthias Tamm

Beilstein J. Org. Chem. 2019, 15, 2534–2543, doi:10.3762/bjoc.15.246

• isolated from THF solution. Keywords: alkyne metathesis; ferrocene; homogeneous catalysis; molybdenum; terminal alkynes; Introduction Alkyne metathesis, the reversible making and breaking of carbon–carbon triple bonds, is clearly gaining more attention. Not only could a great number of active catalysts

Self-assembled coordination thioether silver(I) macrocyclic complexes for homogeneous catalysis

• Zhen Cao,
• Aline Lacoudre,
• Cybille Rossy and
• Brigitte Bibal

Beilstein J. Org. Chem. 2019, 15, 2465–2472, doi:10.3762/bjoc.15.239

• ; homogeneous catalysis; prochiral; silver complex; thioether ligand; Introduction Since the early advances in the late eighties [1][2][3][4][5][6][7][8][9][10], silver(I) catalysis has been widely exploited based on the versatile redox and soft Lewis acid properties of this coinage metal cation. Silver

• candidates for directional metal coordination. Herein, a new syn-atropisomer of 9,10-DPA ortho-substituted by two thioethers is exploited as a ligand for silver(I) salts. The impact of this bis-thioether ligand on silver(I) homogeneous catalysis is evaluated in two tandem addition/cycloisomerization

Recent advances on the transition-metal-catalyzed synthesis of imidazopyridines: an updated coverage

• Gagandeep Kour Reen,
• Ashok Kumar and
• Pratibha Sharma

Beilstein J. Org. Chem. 2019, 15, 1612–1704, doi:10.3762/bjoc.15.165

• ][42][43][44]. Various copper salts have been used as Lewis acid in homogeneous catalysis. CuO nanoparticles (NPs) were used for C–N, C–S, C–O cross-coupling reactions and C-arylation. Recently, exploiting the cross-coupling tendency of CuO NPs, Reddy et al. have reported their use as a heterogeneous

Hydroarylations by cobalt-catalyzed C–H activation

• Rajagopal Santhoshkumar and
• Chien-Hong Cheng

Beilstein J. Org. Chem. 2018, 14, 2266–2288, doi:10.3762/bjoc.14.202

• less expensive and more environmentally benign, have attracted significant attention in recent years [16][17][18][19][20][21][22][23][24][25][26][27]. As a member of the first-row transition metals, cobalt complexes are known to be extensively involved in homogeneous catalysis, in particular, C–H

Cobalt–metalloid alloys for electrochemical oxidation of 5-hydroxymethylfurfural as an alternative anode reaction in lieu of oxygen evolution during water splitting

• Jonas Weidner,
• Stefan Barwe,
• Kirill Sliozberg,
• Stefan Piontek,
• Justus Masa,
• Ulf-Peter Apfel and
• Wolfgang Schuhmann

Beilstein J. Org. Chem. 2018, 14, 1436–1445, doi:10.3762/bjoc.14.121

• [10][11]. The conversion of HMF to FDCA via homogeneous catalysis, however, suffers from two main drawbacks. Firstly, the yield in FDCA is relatively low due to poor oxidation selectivity. Secondly, the recycling of the catalysts and the purification of FDCA from the reaction mixtures is time

Atom-economical group-transfer reactions with hypervalent iodine compounds

• Andreas Boelke,
• Peter Finkbeiner and
• Boris J. Nachtsheim

Beilstein J. Org. Chem. 2018, 14, 1263–1280, doi:10.3762/bjoc.14.108

• atom efficiency. Keywords: atom economy; benziodoxolones; homogeneous catalysis; hypervalent iodine; iodonium salts; Introduction Atom economy (AE) is an important parameter which helps to evaluate the overall efficiency of a chemical reaction or a chemical process [1][2]. It is defined as the

Nanoreactors for green catalysis

• M. Teresa De Martino,
• Loai K. E. A. Abdelmohsen,
• Floris P. J. T. Rutjes and
• Jan C. M. van Hest

Beilstein J. Org. Chem. 2018, 14, 716–733, doi:10.3762/bjoc.14.61

• heterogeneous catalysis Catalysis, in general, is divided into two major types, homogenous and heterogeneous. In homogeneous catalysis catalyst and substrates are both present and molecularly dissolved in the same phase (typically a liquid phase) [46]. Homogeneous catalysis involves the use of biocatalysts

• sites are dispersed [49][50]. Homogeneous catalysis is generally performed under milder operative conditions than heterogeneous catalysis [51]. In fact, heterogeneous catalysts generally possess very high decomposition temperatures (above 100 °C) [52]. The presence of a solid phase often results in the

• formation of temperature gradients when using high temperatures, which leads to an increase in reactant diffusion and a consequent hampering of mass transfer [53]. Furthermore, the catalytic sites in heterogeneous catalysis are often not as well-defined as in homogeneous catalysis. Therefore, homogeneous